 |
Isotel
Surge Protector
Premium quality system protects Sensaphone®, Freeze Monitors and all electronic equipment from high
voltage surges through AC and telephone lines. Includes lifetime $50,000 insurance! |
|
|
|
|
|
 |
FGD-0100
Remote Temperature Sensor (2.8K)
For use with all Sensaphone AutoDialers.
Enables you to monitor temperature at a location away
from your Sensaphone® unit. Measures and tells you the exact temperature
and triggers an alarm when conditions exceed the set high/low limits.
May be mounted anywhere air temperature needs to be measured and can
be used with all Sensaphone® models. Only one sensor
may be wired per input.
Dimensions: 2.5" x .75" x .75" |
|
|
|
|
|
 |
FGD-0101: 2.8K Weatherproof Temperature Probe
Use with 400,800,1400,1800,2000 and Express II
FGD-0102: 10K Weatherproof Temperature Probe
Use with 1400,1800,2000 and Express II and SCADA 3000
Small probes, good general purpose devices for indoor/outdoor
applications. Sensitive temperature element in a stainless steel housing
with a moisture-resistant seal. Convenient mounting clip and 12’
of wire included. Accurate to +/- 1ºF (0.56ºC) with a sensing
range of -40ºF to 175ºF/-40ºC to 80ºC Dimensions:
2" long x 0.25" diameter |
|
|
|
|
|
 |
Magnetic
Reed Door Switch
For use with all Sensaphone AutoDialers.
Detects
any unauthorized entry or intrusion. Usually installed on doors and
windows, the sensors monitor their opening and closing. Several magnetic
reed switches may be wired in series.
Dimensions: 2.5" x 0.75" x 0.5" (part with screw terminals)2.5" x 0.75" x 0.625" (part with magnet) |
|
|
|
|
 |
Passive
Infra-Red Motion Sensor
For use with all Sensaphone AutoDialers.
Monitors
the movement of people in a specific area. Will cause a dial out if
motion is detected. Range of detection covers approximately 50 ft.
of area. Multiple sensors can be wired in series to a single input.
Dimensions: 4" x 6" x 1.5" |
|
|
|
|
|
 |
Mini Alarm
Motion Sensor
For use with all Sensaphone AutoDialers.
Security motion sensor and siren for home
or office security!
This compact motion sensor has a powerful 130 decibel siren and an
alarm output signal that can be connected to any of the Sensaphone
AutoDialers. Freeze Alarm Mini Siren
Dimensions: 2.75"x1.5" x 6.25" Weight: 9 ounces |
|
|
|
|
|
|
Smoke
Detector with Built-In Relay
For use with all Sensaphone AutoDialers.
This hard-wired photoelectric smoke detector is designed for residences and commercial buildings, including homes, apartments, hospitals, hotels and motels. It is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. Built-in relay connects easily to any Sensaphone AutoDialer. UL listed. |
|
|
|
|
Smoke
Detector with Built-In Relay and battery backup.
For use with all Sensaphone AutoDialers.
This hard-wired photoelectric smoke detector is designed for residences and commercial buildings, including homes, apartments, hospitals, hotels and motels. It is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. A 9 VDC alkaline battery is provided for backup in the event building power is lost. Built-in relay connects easily to any Sensaphone AutoDialer. UL listed. |
modelFGD0049B
Just $79.00 USD
|
|
|
|
 |
Humidistat
For use with all Sensaphone AutoDialers.
Detects
too high or too low humidity level. Range of the humidistat is 10%
to 60% RH. The sensor causes an alarm when the humidity exceeds or
falls below the set limit. Multiple sensors may be wired to a single
input. Dimensions: 4.125" x 2.75" x 1.5" |
model FGD0027
Just $27.00 USD
|
|
|
|
 |
10K Immersion
Temperature Sensor
Use with 1400,1800,2000 and Express II and SCADA 3000
Waterproof for measuring the temperature of fluids
inside a pipe. 304 stainless steel probe. Brass WEL-B thermowell (screws
into customer-supplied 0.5" NPT saddle or Thredolet® fitting
in pipe). Fits into thermowell via brass 0.125" NPT fitting.
Accurate to +/-0.36ºF (0.2ºC) with a sensing range of 10ºF
to 230ºF. Includes 8' of 24AWG wire. Dimensions: Thermowell 5.125",
Sensor in well 6.5" |
|
|
|
|
|
|
 |
Water
Detection Sensor
For use with all Sensaphone AutoDialers.
Detects
the presence of water on a horizontal surface. Independently powered
by internal lithium batteries. Multiple sensors can be wired in series
to a single input.
Dimensions: 2.25" x 1.125" x 3.625 |
|
|
|
|
|
 |
WaterBug
200 Water Detection Sensor
For use with all Sensaphone AutoDialers.
Detects
the presence of water on a horizontal or vertical surface. Up to 6
sensors may be added to the controller which is wired to an input
of any Sensaphone AutoDialer. Requires 12 VDC power source.
WaterBug Water Leak Monitor |
|
|
|
|
|
 |
Water
Rope Detection Sensor
For use with all Sensaphone AutoDialers.
Detects the presence of water via the attached water
rope. It's Normally Closed output may be connected the the input of
any Sensaphone AutoDialer. Powered by 2 AA batteries. Up to 10 lengths
of water rope may be connected to create a rope with a maximum length
of 100'. Additional Water Ropes are available. |
|
|
|
|
|
 |
Temp° Alert
For use with all Sensaphone AutoDialers.
Monitors
air temperature from -30° to 130° F (-34° to 54° C).
Simply determine the acceptable temperature limits for your application
by adjusting the temperature limit arms. When temperature exceeds
the setting, the sensor triggers an alarm. Can be mounted to any wall
or vertical surface. Multiple Temp° Alerts may be wired in parallel
to a single input.
Dimensions: 6.25" x 3.25" x 2" |
|
|
|
|
|
 |
GRT8800R Temperature
Alarm
For use with all Sensaphone AutoDialers., or as a stand-alone monitor.
Monitors
for high and low temperature violations. Perfect for coolers, freezers,
refrigerators, food processing, storage, wine cellars, greenhouses
and anywhere temperature monitoring is important. The GRT8800 relay
output may be used to activate sirens, strobes or connected to any
of Sensaphone telephone AutoDialers. Complete with remote sensor!
Temperature Sensor
Dimensions: 5''W
x 3.5''H x .75''D |
|
|
|
|
|
 |
GRH8800 Humidity
Alarm
For use with all Sensaphone AutoDialers., or as a stand-alone monitor.
Monitors
for high and low humidity violations. The GRH8800 relay
output may be used to activate sirens, strobes or connected to any
of Sensaphone telephone AutoDialers.
Dimensions: 5''W
x 3.5''H x .75''D |
|
|
|
|
|
 |
Humidity Transmitter
Use with 1400,1800,2000 and Express II and SCADA 3000
Space-mount, low-profile model has 10 point calibration
accuracy and features a bulk polymer resistive sensor. 3% accuracy
at 20 to 95% RH. Typical drift is less than 1% per year. The sensor
output signal is field-selectable from 0-5 volt, 0-10 volt, or 4-20mA.
Pre wired base makes installation easy.
Dimensions: 4.9" x 3.1" (12.4cm x 7.9cm)
Weight: 0.2 lb (0.9 kg) |
|
|
|
|
|
FGD-0103:
10K Indoor Decorator Zone Temperature Sensor
Use with 1400,1800,2000 and Express II and SCADA 3000
Precision room temperature sensing in an attractive
wall-mounted enclosure. Accurate to +/-0.36ºF (0.2ºC) with
a sensing range of 35º to 140ºF. Beige plastic enclosure,
tan metal faceplate
Dimensions: 4.5" x 3.23" x1.2" |
|
|
|
|
|
 |
Power-Out
Alert™
For use with all Sensaphone AutoDialers.
A compact power outage monitoring device to protect
against power outages. The Power-Out Alert easily plugs into any
110 VAC receptacle outlet for operation. Connect the SPST output
alarm cable to your Sensaphone and prompt notification of the outage
will occur after a fixed 3-8 minute delay. The delay guards against
nuisance alarms. (All Sensaphone's have built-in power monitoring, but this device may be used to monitor another building or service.)
Dimensions: 2.25"
x 2" x 3" (5.7 cm x 5.1 cm x 7.6 cm) |
|
|
|
|
|
 |
FGD-0104:
10K Outdoor Air Weatherproof Temperature Sensor
Use with 1400,1800,2000 and Express II and SCADA 3000
Sensitive temperature element. Stainless steel tube sheathe. Mounted
inside ventilated, treated weather-resistant PVC shield minimizing
radiant energy effects. Mounted on a weatherproof outlet box for easy
outdoor installation. Accurate to +/-0.36ºF (0.2ºC) with
a sensing range of -30ºF to 140ºF. 8' of 24AWG wire included
Dimensions: 9" x3" x2" |
|
|
|
|
|
WUT3000
WR3000
|
Wireless Transmitter and 4 Zone receiver with 3000' range.
For use with all Sensaphone AutoDialers.
Wireless Transmitter and Receiver may be used to connect any contact sensor wirelessly. Transmitter accepts a Normally open or Normally closed contact input. Receiver has a 4 zone relay output that may be wired to 4 independent inputs of your Sensaphone or grouped together to one or more inputs.
| Program as many as 4 transmitters to one receiver for actual zone recognition on the AutoDialer. Incredible 600' range over open ground. |
|
|
|
|
|
 |
Phonecell®
SX5E and SX5T Fixed Wireless Terminal
For use with all Sensaphone AutoDialers.
Provides proven, reliable access for your Sensaphone Monitor where phone service is needed and cellular networks are available*.
All of your communications requirements, such as voice, fax and data
can be easily supported. The Phonecell gives you a full 3 watts of
power for reliable signal strength. Simple RJ-11 C interface. Compatible
with all Sensaphone models! Dimensions: 9.7" x 7.2" x 1.7" (24.6 x 18.3 x 4.3 cm)
*Cellular service required through local cellular provider.
Telular Fixed Terminal Phone Cells |
|
|
|
|
|
Wireless
Jack
Turns any AC
outlet into a phone jack to which the Sensaphone may be connected.
Avoids costly, time consuming, and difficult installations. |
|
|
|
|
|
FGD-0300: Sensaphone 2000
Serial to Ethernet adapter
Allows you to connect your Sensaphone 2000 directly to an ethernet jack, enabling the ability to access the 2000 from any computer on the LAN or WAN. |
|
|
|
|
|
